Release errors
RESTRICTED
er tangent value.
The bomb will be
released too soon and a "short"
would
result.
2.
worn Roller.
a.
Whentrail has been
set in, the rol-
ler will rest upon the disc theprop-
er distance upward for trail.
but
since the roller is of smaller cir-
cumference,
it obtains its
necess-
агу
R.P.M's
for synchronization at
lower point on
the disc.
This
means the rate mechanism is displaced
less (used less! than it should be,
and this means that the rate quad-
rant is not at the correct dropping
angle for the given altitude, velo-
city of closure,
and
trail value of
of the bomb.The result is an
"over".
3.
Slipping Roller.
a.
As in "2
there is no difficulty with
trail, but since the roller slips,
in order
to obtain the necessary
roller R.P.M's to synchronize,
the
roller will have to be raised
hiah-
er up on the disc than otherwise.
The result is excessive use of the
rate mechanism, and the rate quad-
rant
will have
been
brought down-
ward
too far toward the
oncoming
telescope quadrant.
(1)
This
is one of the three cases
in which itis impossible to synchr-
onize.
This is only
because roller
slippage is never at a constant rate;
it increases as the optics
approach
zero degrees because of
increasing
tension on the telescope mirror re-
turn
spring.
4. Incorrect Disc Speed.
ЗУ П -
Chroniya: on
* be brained wic
heroe ta-
a disc steed
0. 100
a dise sagga: 0000
...-
* 30
speedi
a disa
speed! use
anism is occasioned.
SC.
-123:
C* 3 2:s0
3-₴ 3-
mech-
rofier
for
[ow
fow
tne
212