NORDEN.
← All partsPART / rate-governor

Motor governor and breaker linkage

The crossed governor arms, sliding collar and connecting rod that move the telescope motor’s breaker arm.

Drag to turn · Arrow keys to rotate · Home to reset

Follow the mechanism

Change governor extension to follow the rigid arms and pinned links as they draw the collar toward the motor.

The collar turns with the governor. A stationary guide and connecting rod transmit its axial movement to the breaker lever, separating the electrical contacts.

Rotate or separate the assembly to inspect the moving parts inside the open housing. Rotation and extension are independent inspection controls; they do not simulate centrifugal forces or regulated motor speed.

A proportional reconstruction using the Lowry manual, an exposed motor photograph and an earlier Barth patent. Exact production revision, dimensions, spring forces and contact travel remain unverified.

Geometry follows the cited drawings and photographs. Unmeasured dimensions remain approximate; exploded spacing reveals existing model groups rather than a prescribed disassembly procedure.

Used in these components

COMPONENT · PAGE 77

Sight-head assemblies

The housing halves, cardan, telescope and rate-end mechanisms brought together above the stabilizer.

COMPONENT · PAGE 86

Mechanical rate-end computer

A motor-driven disc, movable roller and separate quadrants translating mechanical settings into telescope motion.

Reference views

Inspect the full sheets as well as detail views. Figure numbers belong to their named document; similar-looking parts may be different variants.

Lowry Field Bombsight Maintenance Manual, September 1943, reader148 printed130, figure 45
Lowry Field Bombsight Maintenance Manual, September 1943, reader148 printed130 · Fig. 45

Primary source spread; motor half housing, knob mounting plate, motor, governor, disc and detached shaft blocks. Geometry follows this disassembly state, not installed spacing.

Lowry Field 1943, reader87 printed69
Lowry Field 1943, reader87 printed69

Parallel-wound telescope motor; breaker points in series with armature. Governor collar pulls breaker arm against altitude spring tension; points open and reclose to regulate speed. No calibrated operating values reproduced.

Lowry Field 1943, reader147 printed129
Lowry Field 1943, reader147 printed129

Rate/displacement knob and mounting plate disassembly; M-6 gear shift fork explicitly variant-dependent.

Lowry Field 1943, reader149 printed131
Lowry Field 1943, reader149 printed131

Search knob removed by two screws, pinion on tapered pin.

Lowry Field 1943, reader150 printed132
Lowry Field 1943, reader150 printed132

Confirms tachometer bracket four screws, field pole shoe, commutator-end bracket, brushes, governor link and housing. Shaft blocks explicitly M-6. Change-speed bracket marked M-3 here.

Lowry Field 1943, reader151 printed133
Lowry Field 1943, reader151 printed133

Governor sleeve guide, bearing and armature relationships. Change-speed bracket marked M-6 here, unlike preceding page; variant correspondence unresolved.

Further reference sources